{"title":"Non-PLA Polymers","description":"\u003cp\u003eIncludes PETG, PCTG, HTPETG, and TPU\u003c\/p\u003e","products":[{"product_id":"simply-white-petg","title":"White PETG *new low price*","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*New low price*\u003c\/strong\u003e\u003c\/em\u003e High quality, US-made PETG just got more affordable! The value gets even better with free US shipping for orders $49+, 10% loyalty discount for orders $99+, and \u003ca href=\"https:\/\/proto-pasta.com\/pages\/bulk-discounts\" title=\"bulk discounts\" rel=\"noopener\" target=\"_blank\"\u003ebulk discounts\u003c\/a\u003e of 15-35% off starting at $249.\u003c\/p\u003e\n\u003cp\u003eFor Protopasta White PETG, we minimize processing and ingredients, without sacrificing quality, for an exceptional value. There's nothing basic about the care and consideration this material is made with.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003ePETG is quite easy to print with bed temperatures from 70+ C and nozzle temps 235+ C. Higher nozzle temps improve layer adhesion, but risk overheating when printing too slow. We print up to 275 C, but 255 C is a good compromise. Start with a Generic PETG profile and adjust if\/as needed.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eLike other PETGs, material can stick to the nozzle. \u003cspan\u003eDrying may not resolve this completely. In this case, consider reducing the flow rate to less than 100% to reduce buildup. Further, you might add a \u003ca rel=\"noopener\" title=\"nozzle wipe at layer change gcode\" href=\"https:\/\/forum.bambulab.com\/t\/wipe-nozzle-option-during-print\/15576\/16\" target=\"_blank\"\u003enozzle wipe at layer change with custom gcode\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSimply White PETG includes:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% new PETG, made in the USA for the highest quality result\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003equality ingredients plus in-house processing for curated chemistry\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eprocessing from 230+ C @ 2 cu mm\/s volume rate, 70+ C bed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eless rigid than PLA and HTPLA for more flex before break\u003c\/li\u003e\n\u003cli\u003emore heat resistance than PLA, but less than heat treated HTPLA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":43268443078904,"sku":"PETG170-WHT","price":4.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1kg Spool","offer_id":42301470638328,"sku":"PETG1710-WHT","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 3kg Spool","offer_id":43010580742392,"sku":"PETG1730-WHT","price":89.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/products\/pla1-wht-4043d-white-3d-printfilament_c4f31cf2-7a9a-4b8b-a61b-eb2e693f49e9.jpg?v=1642116879"},{"product_id":"simply-black-petg","title":"Black PETG *new low price*","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*New low price*\u003c\/strong\u003e\u003c\/em\u003e High quality, US-made PETG just got more affordable! The value gets even better with free US shipping for orders $49+, 10% loyalty discount for orders $99+, and \u003ca href=\"https:\/\/proto-pasta.com\/pages\/bulk-discounts\" title=\"bulk discounts\" rel=\"noopener\" target=\"_blank\"\u003ebulk discounts\u003c\/a\u003e of 15-35% off starting at $249.\u003c\/p\u003e\n\u003cp\u003eFor Protopasta Black PETG, we minimize processing and ingredients, without sacrificing quality, for an exceptional value. There's nothing basic about the care and consideration this material is made with.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003ePETG is quite easy to print with bed temperatures from 70+ C and nozzle temps 235+ C. Higher nozzle temps improve layer adhesion, but risk overheating when printing too slow. We print up to 275 C, but 255 C is a good compromise. Start with a Generic PETG profile and adjust if\/as needed.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eLike other PETGs, material can stick to the nozzle. \u003cspan\u003eDrying may not resolve this completely. In this case, consider reducing the flow rate to less than 100% to reduce buildup. Further, you might add a \u003ca href=\"https:\/\/forum.bambulab.com\/t\/wipe-nozzle-option-during-print\/15576\/16\" title=\"nozzle wipe at layer change gcode\" rel=\"noopener\" target=\"_blank\"\u003enozzle wipe at layer change with custom gcode\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSimply Black PETG includes:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% new PETG, made in the USA for the highest quality result\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003equality ingredients plus in-house processing for curated chemistry\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eprocessing from 235+ C @ 2 cu mm\/s volume rate, 70+ C bed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eless rigid than PLA and HTPLA for more flex before break\u003c\/li\u003e\n\u003cli\u003emore heat resistance than PLA, but less than heat treated HTPLA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":43268446028024,"sku":"PETG170-BLK","price":4.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1kg Spool","offer_id":42305158611192,"sku":"PETG1710-BLK","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 3kg Spool","offer_id":43010601943288,"sku":"PETG1730-BLK","price":89.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/products\/pla1-blk-4043d-black-pla-3d-print_c8501654-b233-4e2e-b541-c7540719e740.jpg?v=1642191302"},{"product_id":"joels-highfive-blue-petg","title":"Joel's Highfive Blue PETG","description":"\u003cp\u003eYour favorite blue from your favorite 3D Printing Nerd, \u003ca title=\"3D Printing Nerd YouTube\" href=\"https:\/\/www.youtube.com\/c\/3DPrintingNerd\" target=\"_blank\"\u003eJoel Telling\u003c\/a\u003e, now in PETG. \u003cstrong data-mce-fragment=\"1\"\u003eA portion of sales to Joel's favorite charity, \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.seattlechildrens.org\/giving\/\" title=\"Seattle Children's Hospital\" target=\"_blank\"\u003eSeattle Children's Hospital\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProtopasta PETG includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003equality ingredients plus in-house processing for curated chemistry\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eminimal packaging with recyclable cardboard spools\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eprocessing from 230+ C @ 2 cu mm\/s volume rate, 70+ C bed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eless rigid than PLA and HTPLA for more flex before break\u003c\/li\u003e\n\u003cli\u003emore heat resistance than PLA, but less than heat treated HTPLA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":43268453826808,"sku":"PETG170-HFB","price":5.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1kg Spool","offer_id":42364397420792,"sku":"PETG1710-HFB","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/products\/htpm-hfb_highfive-blue-htpla-3d-print_62e449c2-ff8d-4bac-ba3f-d1fe9b4bb547.jpg?v=1643309070"},{"product_id":"carbon-fiber-petg","title":"Carbon Fiber PETG *new low price*","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*New low price*\u003c\/strong\u003e\u003c\/em\u003e ~20% stronger + 90% stiffer than PETG w\/o fibers. High quality, US-made PETG just got more affordable! Compare to Atomic, Prusament, and Pantheon PETG Carbon Fiber, but with \u003ca href=\"https:\/\/proto-pasta.com\/blogs\/stories\/endless-exploration-ex12-jan-2026-high-performance-pctg-composites\" title=\"PLA, PETG, and PCTG comparison\" rel=\"noopener\" target=\"_blank\"\u003eProtopasta design intent + quality\u003c\/a\u003e. The value gets even better with free US shipping for orders $49+, 10% loyalty discount for orders $99+, and \u003ca href=\"https:\/\/proto-pasta.com\/pages\/bulk-discounts\" title=\"bulk discounts\" rel=\"noopener\" target=\"_blank\"\u003ebulk discounts\u003c\/a\u003e of 15-35% off starting at $249.\u003c\/p\u003e\n\u003cp\u003eLike \u003ca rel=\"noopener noreferrer\" title=\"Carbon Fiber\" href=\"https:\/\/www.proto-pasta.com\/collections\/carbon-fiber\" target=\"_blank\"\u003eCarbon Fiber\u003c\/a\u003e PLA, Protopasta Carbon Fiber PETG is a performance value. It requires higher printing temperatures than Carbon Fiber PLA, but is still quite easy to print with bed temperatures from 70+ C and nozzle temps 235+ C. Higher nozzle temps improve layer adhesion, but risk overheating when printing too slow. We print up to 275 C, but 255 C is a good compromise. Start with a Generic PETG profile and adjust if\/as needed.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eLike other PETGs, material can stick to the nozzle. \u003cspan\u003eDrying may not resolve this completely. In this case, consider reducing the flow rate to less than 100% to reduce buildup. Further, you might add a \u003ca href=\"https:\/\/forum.bambulab.com\/t\/wipe-nozzle-option-during-print\/15576\/16\" title=\"nozzle wipe at layer change gcode\" rel=\"noopener\" target=\"_blank\"\u003enozzle wipe at layer change with custom gcode\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003ePETG-CF is more flexible and ductile than Carbon Fiber PLA and HTPLA, but less stiff and strong. PETG-CF has a thermal performance in between PLA and heat treated HTPLA. Consider PCTG as a PETG alternative for improved durability and chemical resistance. \u003ca href=\"https:\/\/proto-pasta.com\/blogs\/stories\/endless-exploration-ex12-jan-2026-high-performance-pctg-composites\" title=\"PLA, PETG, and PCTG comparison\" rel=\"noopener\" target=\"_blank\"\u003eMore details in our blog\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eProtopasta Carbon Fiber PETG includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% new PETG, made in the USA for the highest quality result\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003equality ingredients plus in-house processing for curated chemistry\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eprocessing from 235+ C @ 2 cu mm\/s volume rate, 70+ C bed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eless rigid than PLA and HTPLA for more flex before break\u003c\/li\u003e\n\u003cli\u003emore heat resistance than PLA, but less than heat treated HTPLA\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":43268449894648,"sku":"PETG170-CF7","price":5.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g Spool","offer_id":42363926544632,"sku":"PETG1705-CF7","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1kg Spool","offer_id":42364301607160,"sku":"PETG1710-CF7","price":49.99,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 3kg Spool","offer_id":42363926610168,"sku":"PETG1730-CF7","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/products\/htp2-cf_black-carbon-fiber-htpla-3d-print_ff3245a2-6ee4-4116-970d-7076d56ccd34.jpg?v=1659387230"},{"product_id":"simply-clear-petg","title":"Clear PETG *new low price*","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*New low price*\u003c\/strong\u003e\u003c\/em\u003e High quality, US-made PETG just got more affordable! The value gets even better with free US shipping for orders $49+, 10% loyalty discount for orders $99+, and \u003ca href=\"https:\/\/proto-pasta.com\/pages\/bulk-discounts\" title=\"bulk discounts\" rel=\"noopener\" target=\"_blank\"\u003ebulk discounts\u003c\/a\u003e of 15-35% off starting at $249.\u003c\/p\u003e\n\u003cp\u003eFor Protopasta Clear PETG, we minimize processing and ingredients, without sacrificing quality, for an exceptional value. There's nothing basic about the care and consideration this material is made with.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003ePETG is quite easy to print with bed temperatures from 70+ C and nozzle temps 235+ C. Higher nozzle temps improve layer adhesion, but risk overheating when printing too slow. We print up to 275 C, but 255 C is a good compromise. Start with a Generic PETG profile and adjust if\/as needed.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eLike other PETGs, material can stick to the nozzle. \u003cspan\u003eDrying may not resolve this completely. In this case, consider reducing the flow rate to less than 100% to reduce buildup. Further, you might add a \u003ca rel=\"noopener\" title=\"nozzle wipe at layer change gcode\" href=\"https:\/\/forum.bambulab.com\/t\/wipe-nozzle-option-during-print\/15576\/16\" target=\"_blank\"\u003enozzle wipe at layer change with custom gcode\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSimply Clear PETG includes:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% new PETG, made in the USA for the highest quality result\u003c\/li\u003e\n\u003cli\u003equality ingredients plus in-house processing for curated chemistry\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eprocessing from 235+ C @ 2 cu mm\/s volume rate, 70+ C bed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eless rigid than PLA and HTPLA for more flex before break\u003c\/li\u003e\n\u003cli\u003emore heat resistance than PLA, but less than heat treated HTPLA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":43268434460920,"sku":"PETG170-CLR","price":4.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1kg Spool","offer_id":42364430385400,"sku":"PETG1710-CLR","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/products\/cpe2-clr_post-industrial-petg-3d-print_ce2dc7b5-b985-4a94-856e-d49f9c71f494.jpg?v=1772066274"},{"product_id":"amies-blood-of-my-enemies-translucent-red-petg","title":"Amie's \"Blood of My Enemies\" Translucent Red PETG","description":"\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cp\u003e*Now available in PETG!\u003c\/p\u003e\n\u003cp\u003eAmie's \"Blood of My Enemies\" is an original, one-of-a-kind, translucent dark red filament designed by \u003ca href=\"https:\/\/www.proto-pasta.com\/products\/the-proto-pasta-experience\" title=\"filament workshop\" target=\"_blank\"\u003efilament workshop\u003c\/a\u003e \u003cspan\u003eattendee Amie\u003c\/span\u003e\u003cspan\u003e (\u003c\/span\u003e\u003cu\u003e\u003ca href=\"http:\/\/www.instagram.com\/amiedoubled\" title=\"@amiedoubled\" class=\"text-link\" target=\"_blank\"\u003e@amiedoubled\u003c\/a\u003e\u003c\/u\u003e\u003cspan\u003e). \u003c\/span\u003e\u003cstrong\u003e5% of sales support\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Scholarship\" href=\"https:\/\/nvmusa.org\/nvm-scholarship.html\" target=\"_blank\"\u003eAmie's Scholarship\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor women in STEM!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eProtopasta PETG includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003equality ingredients plus in-house processing for curated chemistry\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eminimal packaging with recyclable cardboard spools\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eprocessing from 230+ C @ 2 cu mm\/s volume rate, 70+ C bed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eless rigid than PLA and HTPLA for more flex before break\u003c\/li\u003e\n\u003cli\u003emore heat resistance than PLA, but less than heat treated HTPLA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\" id=\"block-yui_3_17_2_1_1417156388310_51937\"\u003e\n\u003cdiv class=\"sqs-block-content\" id=\"yui_3_17_2_7_1419892303855_2942\"\u003e\n\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\" id=\"block-yui_3_17_2_1_1417156388310_298376\"\u003e\n\u003cdiv class=\"sqs-block-content\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\" id=\"block-02772462f7d22eb6720f\"\u003e\n\u003cdiv class=\"sqs-block-content\" id=\"yui_3_17_2_7_1419892303855_2978\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":43335780630776,"sku":"PETG170-BME","price":5.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g Spool","offer_id":43335780663544,"sku":"PETG1705-BME","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1kg Spool","offer_id":43335780696312,"sku":"PETG1710-BME","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/products\/sub2-bme-blood-of-my-enemies-3d-print_236f12d0-f689-49b4-857a-2106486eeaf0.jpg?v=1664923544"},{"product_id":"black-recycled-petg","title":"Black Recycled PETG","description":"\u003cdiv data-block-type=\"2\" class=\"sqs-block html-block sqs-block-html\"\u003e\n\u003ch1\u003eRecycled! Compare to Black PETG\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e“Since 2013, Protopasta has valued \u003c\/span\u003e\u003ca href=\"https:\/\/www.proto-pasta.com\/blogs\/press\/84648900-we-make-good-stuff\"\u003e\u003cspan style=\"font-weight: 400;\"\u003equality\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e, \u003c\/span\u003e\u003ca href=\"https:\/\/www.proto-pasta.com\/blogs\/how-to\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ereliability\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e, and \u003c\/span\u003e\u003ca href=\"https:\/\/www.proto-pasta.com\/blogs\/stories\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ecreativity\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e. We seek to \u003c\/span\u003e\u003ca href=\"https:\/\/www.proto-pasta.com\/blogs\/editorial\/about-spools-waste-and-customer-experience\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ereduce waste\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e in our production and build relationships in our \u003c\/span\u003e\u003ca href=\"https:\/\/www.proto-pasta.com\/blogs\/press\/proto-pasta-collaborates-with-trash-hackers-collective-turning-waste-into-keepsakes\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ecommunity\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e.”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe’ve taken many steps over the years to ensure our commitment to these values. We’ve collected our high-quality waste stream and turned it into high-quality recycled filament. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn original, one-of-a-kind Protopasta Recycled PETG filament\u003c\/li\u003e\n\u003cli\u003eMade from our very own rescued waste stream\u003c\/li\u003e\n\u003cli\u003eCompare to \u003ca href=\"https:\/\/proto-pasta.com\/collections\/all\/products\/simply-black-petg\" title=\"Black PETG\" rel=\"noopener\" target=\"_blank\"\u003eBlack PETG\u003c\/a\u003e, but with color\/finish variation\u003c\/li\u003e\n\u003cli\u003eFully compounded to ensure consistency throughout a batch\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eDesigned \u0026amp; produced by Protoplant exclusively for you\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Recycled filaments are already marked down and not eligible for further discounts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-yui_3_17_2_1_1417156388310_51937\" data-block-type=\"2\" class=\"sqs-block html-block sqs-block-html\"\u003e\n\u003cdiv id=\"yui_3_17_2_7_1419892303855_2942\" class=\"sqs-block-content\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-02772462f7d22eb6720f\" data-block-type=\"2\" class=\"sqs-block html-block sqs-block-html\"\u003e\n\u003cdiv id=\"yui_3_17_2_7_1419892303855_2978\" class=\"sqs-block-content\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":45299448217848,"sku":"RPET170-BLA","price":2.5,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 1kg Spool","offer_id":45299448348920,"sku":"RPET1710-BLA","price":24.99,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 6x1kg Case","offer_id":45299448381688,"sku":"RPET1760-BLA","price":124.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/products\/RPLA-BLA_black-recycled-pla-3d-print.jpg?v=1635292245"},{"product_id":"recycled-carbon-fiber-petg","title":"Recycled Carbon Fiber PETG","description":"\u003cdiv data-block-type=\"2\" class=\"sqs-block html-block sqs-block-html\"\u003e\n\u003ch1\u003eRecycled! Compare to Carbon Fiber PETG\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e“Since 2013, Protopasta has valued \u003c\/span\u003e\u003ca href=\"https:\/\/www.proto-pasta.com\/blogs\/press\/84648900-we-make-good-stuff\"\u003e\u003cspan style=\"font-weight: 400;\"\u003equality\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e, \u003c\/span\u003e\u003ca href=\"https:\/\/www.proto-pasta.com\/blogs\/how-to\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ereliability\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e, and \u003c\/span\u003e\u003ca href=\"https:\/\/www.proto-pasta.com\/blogs\/stories\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ecreativity\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e. We seek to \u003c\/span\u003e\u003ca href=\"https:\/\/www.proto-pasta.com\/blogs\/editorial\/about-spools-waste-and-customer-experience\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ereduce waste\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e in our production and build relationships in our \u003c\/span\u003e\u003ca href=\"https:\/\/www.proto-pasta.com\/blogs\/press\/proto-pasta-collaborates-with-trash-hackers-collective-turning-waste-into-keepsakes\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ecommunity\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e.”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eWe’ve taken many steps over the years to ensure our commitment to these values. The next phase of this commitment is finally here: Recycled PLA! We’ve collected our high-quality waste stream and turned it into high-quality recycled filament. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRigid PETG with a low-gloss finish \u0026amp; defect-hiding texture\u003c\/li\u003e\n\u003cli\u003eFrom our \u003ca title=\"Carbon Fiber PETG\" href=\"https:\/\/proto-pasta.com\/collections\/all\/products\/carbon-fiber-petg\" rel=\"noopener\" target=\"_blank\"\u003eCarbon Fiber PETG\u003c\/a\u003e waste stream of short spools\u003c\/li\u003e\n\u003cli\u003eAll the benefits of \u003ca title=\"Carbon Fiber PETG\" href=\"https:\/\/proto-pasta.com\/collections\/all\/products\/carbon-fiber-petg\" rel=\"noopener\" target=\"_blank\"\u003eCarbon Fiber PETG\u003c\/a\u003e, but supply is limited\u003c\/li\u003e\n\u003cli\u003eFully compounded to ensure consist color \u0026amp; performance\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eDesigned \u0026amp; produced by Protoplant exclusively for you\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eSpecial note - \u003ca title=\"Micro Swiss wear-resistant nozzles\" href=\"https:\/\/www.proto-pasta.com\/collections\/accessories\/products\/plated-brass-wear-resistant-nozzles\" target=\"_blank\"\u003ewear resistant nozzle\u003c\/a\u003e recommended\u003c\/i\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Recycled filaments are already marked down and not eligible for further discounts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block-02772462f7d22eb6720f\" data-block-type=\"2\" class=\"sqs-block html-block sqs-block-html\"\u003e\n\u003cdiv id=\"yui_3_17_2_7_1419892303855_2978\" class=\"sqs-block-content\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":45299471155448,"sku":"RPET170-CF7","price":4.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1kg Spool","offer_id":45299471188216,"sku":"RPET1710-CF7","price":34.99,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 6x1kg Case","offer_id":45299471220984,"sku":"RPET1760-CF7","price":174.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/products\/RPLA-CF_carbon-fiber-recycled-pla-3d-print.jpg?v=1635788235"},{"product_id":"clear-flexible-tpu","title":"Clear Flexible TPU","description":"\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cp\u003e3D print parts that can flex without breaking!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFeatured in EX3, \u003ca rel=\"noopener\" href=\"https:\/\/proto-pasta.com\/blogs\/stories\/endless-exploration-ex3-july-2024-tpe-tpu-materials\" title=\"Endless Exploration July 2024\" target=\"_blank\"\u003eJuly 2024's Endless Exploration\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eA clear, flexible TPU with hardness of about 98A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDurable w\/ good memory when folded like a hinge (folding triangle from \u003ca rel=\"noopener\" href=\"https:\/\/www.makershed.com\/collections\/make-author-spotlights-joan-horvath-and-rich-cameron\" target=\"_blank\"\u003e\u003cspan\u003eJoan Horvath and Rich Cameron's book \u003c\/span\u003e\u003c\/a\u003e\u003ci\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.makershed.com\/collections\/make-author-spotlights-joan-horvath-and-rich-cameron\" target=\"_blank\"\u003eMake: Geometry\u003c\/a\u003e)\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003eAbsorbs energy for minimal return when bounced\u003c\/li\u003e\n\u003cli\u003eEasy printing, \u003cstrong\u003edyeable\u003c\/strong\u003e, and holds shape up to 200 C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDrying overnight recommended before printing\u003c\/li\u003e\n\u003cli\u003ePrinting starting at 240 C w\/ no bed heat required\u003c\/li\u003e\n\u003cli\u003ePrep bed w\/ Magigoo to avoid permanent bond\u003c\/li\u003e\n\u003cli\u003eCompare to 90A-95A hardness or NinjaTek Cheetah\u003c\/li\u003e\n\u003cli\u003eProduced by Protoplant exclusively for Protopasta\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003ca data-mce-fragment=\"1\" rel=\"noopener\" title=\"Endless Exploration Filament Subscription\" href=\"https:\/\/www.proto-pasta.com\/products\/endless-pastabilities\" target=\"_blank\"\u003eSubscribe to Endless Exploration\u003c\/a\u003e for new materials with new function first and at a discount, every 2 months. \u003ca data-mce-fragment=\"1\" title=\"Newsletter subscribe\" href=\"http:\/\/3dp.li\/newsletter\" target=\"_blank\"\u003eSubscribe to our newsletter\u003c\/a\u003e for product news, support \u0026amp; discounts!\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":45608453570808,"sku":"T98A170-CLR","price":7.0,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 500g Spool","offer_id":45608753692920,"sku":"T98A1705-CLR","price":49.99,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 1kg Spool","offer_id":45608453603576,"sku":"T98A1710-CLR","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/files\/FlexibleTPU-ezgif.com-video-to-gif-converter.gif?v=1723757291"},{"product_id":"static-dissipative-petg","title":"Static Dissipative PETG","description":"\u003ch1\u003eFor ESD safe 3D prints!\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for static dissipation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSurface resistance 10^4-10^6 \u003cspan\u003eΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrints + performs like PETG\u003c\/li\u003e\n\u003cli\u003eESD-safe like Static Dissipative PLA \u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener\" href=\"https:\/\/proto-pasta.com\/blogs\/stories\/endless-exploration-ex5-november-2024-dissipative-filaments-for-esd-applications\" title=\"Endless PLA November 2024\" target=\"_blank\"\u003eFrom Nov 2024 Endless Exploration\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSA made Protopasta exclusive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.proto-pasta.com\/products\/endless-pastabilities\" title=\"Endless Exploration Filament Subscription\" rel=\"noopener\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/www.proto-pasta.com\/products\/endless-pastabilities\"\u003eSubscribe to Endless Exploration\u003c\/a\u003e for new materials w\/ new function every 2 months. \u003ca href=\"http:\/\/3dp.li\/newsletter\" title=\"Newsletter subscribe\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"http:\/\/3dp.li\/newsletter\"\u003eSubscribe to our newsletter\u003c\/a\u003e for product news, support \u0026amp; discounts!\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":46011579007224,"sku":"PETG170-ESD","price":7.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g Spool","offer_id":46011579039992,"sku":"PETG1705-ESD","price":49.99,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1kg Spool","offer_id":46011579072760,"sku":"PETG1710-ESD","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/files\/PETG-ESD-icosa-3dprint.png?v=1734046387"},{"product_id":"clear-rigid-tpu","title":"Clear Rigid TPU","description":"\u003cdiv class=\"sqs-block html-block sqs-block-html\" data-block-type=\"2\"\u003e\n\u003cp\u003eDiscontinued - pellets are no longer available.\u003c\/p\u003e\n\u003cp\u003eReplaces \u003ca href=\"https:\/\/proto-pasta.com\/products\/white-rigid-tpu\" title=\"White Rigid TPU\" rel=\"noopener\" target=\"_blank\"\u003eWhite Rigid TPU\u003c\/a\u003e. Same TPU, but without white pigment.\u003c\/p\u003e\n\u003cp\u003e3D print parts that can flex without breaking!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFeatured as white in EX3, \u003ca rel=\"noopener\" href=\"https:\/\/proto-pasta.com\/blogs\/stories\/endless-exploration-ex3-july-2024-tpe-tpu-materials\" title=\"Endless Exploration July 2024\" target=\"_blank\"\u003eJuly 2024's Endless Exploration\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eA clear, semi-rigid TPU with hardness of about 70D\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNylon-like durability both mechanically \u0026amp; chemically\u003c\/li\u003e\n\u003cli\u003eUV resistant\u003c\/li\u003e\n\u003cli\u003eLess flexible than 98A, but still returns when folded (folding triangle from \u003ca href=\"https:\/\/www.makershed.com\/collections\/make-author-spotlights-joan-horvath-and-rich-cameron\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eJoan Horvath and Rich Cameron's book \u003c\/span\u003e\u003c\/a\u003e\u003ci\u003e\u003ca href=\"https:\/\/www.makershed.com\/collections\/make-author-spotlights-joan-horvath-and-rich-cameron\" rel=\"noopener\" target=\"_blank\"\u003eMake: Geometry\u003c\/a\u003e)\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy printing, \u003cstrong\u003edyeable\u003c\/strong\u003e, \u0026amp; holds shape up to 200 C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDrying overnight recommended before printing\u003c\/li\u003e\n\u003cli\u003ePrinting starting at 240 C w\/ no bed heat required\u003c\/li\u003e\n\u003cli\u003ePrep bed w\/ Magigoo to avoid permanent bond\u003c\/li\u003e\n\u003cli\u003eCompare to 75D hardness or NinjaTek Armadillo\u003c\/li\u003e\n\u003cli\u003eProduced by Protoplant exclusively for Protopasta\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003ca rel=\"noopener\" title=\"Endless Exploration Filament Subscription\" href=\"https:\/\/www.proto-pasta.com\/products\/endless-pastabilities\" target=\"_blank\"\u003eSubscribe to Endless Exploration\u003c\/a\u003e for new materials with new function first and at a discount, every 2 months. \u003ca title=\"Newsletter subscribe\" href=\"http:\/\/3dp.li\/newsletter\" target=\"_blank\"\u003eSubscribe to our newsletter\u003c\/a\u003e for product news, support \u0026amp; discounts!\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":46268523282680,"sku":"T70D170-CLR","price":7.0,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 500g Spool","offer_id":46268523315448,"sku":"T70D1705-CLR","price":49.99,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 1kg Spool","offer_id":46268523348216,"sku":"T70D1710-CLR","price":94.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/files\/T70D-CLR-icosa-3dprint.png?v=1741901413"},{"product_id":"black-high-strength-carbon-fiber-pctg","title":"Black High Strength Carbon Fiber PCTG","description":"\u003cp\u003e\u003cstrong\u003e~45% stronger + 250% stiffer than PCTG w\/o fibers.\u003c\/strong\u003e High quality, US-made PCTG just got higher performance! The stiffest, strongest material of it's type that we've tested (\u003ca href=\"https:\/\/proto-pasta.com\/blogs\/stories\/endless-exploration-ex12-jan-2026-high-performance-pctg-composites\" title=\"PLA, PETG, and PCTG comparison\" rel=\"noopener\" target=\"_blank\"\u003esee our comparison\u003c\/a\u003e)!!! The value gets even better with free US shipping for orders $49+, 10% loyalty discount for orders $99+, and \u003ca href=\"https:\/\/proto-pasta.com\/pages\/bulk-discounts\" title=\"bulk discounts\" rel=\"noopener\" target=\"_blank\"\u003ebulk discounts\u003c\/a\u003e of 15-35% off starting at $249.\u003c\/p\u003e\n\u003cp\u003eLike \u003ca rel=\"noopener noreferrer\" title=\"Carbon Fiber\" href=\"https:\/\/www.proto-pasta.com\/collections\/carbon-fiber\" target=\"_blank\"\u003eCarbon Fiber\u003c\/a\u003e PLA, Protopasta Carbon Fiber PCTG is a performance value. It requires higher printing temperatures than Carbon Fiber PLA, but is still quite easy to print with bed temperatures from 70+ C and nozzle temps 255+ C. Higher nozzle temps improve layer adhesion, but risk overheating when printing too slow. We print up to 275 C, but 255 C is a good compromise. Start with a Generic PETG or PCTG profile and adjust if\/as needed.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eLike other PCTGs and PETGs, material can stick to the nozzle. \u003cspan\u003eDrying may not resolve this completely. In this case, consider reducing the flow rate to less than 100% to reduce buildup. Further, you might add a \u003ca href=\"https:\/\/forum.bambulab.com\/t\/wipe-nozzle-option-during-print\/15576\/16\" title=\"nozzle wipe at layer change gcode\" rel=\"noopener\" target=\"_blank\"\u003enozzle wipe at layer change with custom gcode\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eBlack High Strength Carbon Fiber PCTG is stronger and more ductile than Carbon Fiber PLA and HTPLA, but less stiff. It also has a thermal performance in between PLA and heat treated HTPLA. Consider PCTG as a PETG alternative for improved durability, UV, and chemical resistance. \u003ca href=\"https:\/\/proto-pasta.com\/blogs\/stories\/endless-exploration-ex12-jan-2026-high-performance-pctg-composites\" title=\"PLA, PETG, and PCTG comparison\" rel=\"noopener\" target=\"_blank\"\u003eMore details in our blog\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eProtopasta Carbon Fiber PCTG includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% new PCTG, made in the USA for the highest quality result\u003c\/li\u003e\n\u003cli\u003equality ingredients plus in-house processing for curated chemistry\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eprocessing from 255+ C @ 2 cu mm\/s volume rate, 80+ C bed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003emore flex before break than PETG, can work for living hinges\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003emore heat resistance than PLA, but less than heat treated HTPLA\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":48017869996280,"sku":"PGCF170-HSB","price":5.5,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g Spool","offer_id":48017870029048,"sku":"PGCF1705-HSB","price":34.99,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1kg Spool","offer_id":50083195879672,"sku":"PGCF1710-HSB","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/files\/htp2-cf_black-carbon-fiber-htpla-3d-print_860x_723c4941-69d4-4fec-abfb-0479f17c23dd.jpg?v=1772066287"},{"product_id":"clear-pctg","title":"Clear PCTG","description":"\u003cp\u003e\u003cstrong\u003eHigh quality, US-made PCTG by Protopasta!\u003c\/strong\u003e Already a great value, made better with free US shipping for orders $49+, 10% loyalty discount for orders $99+, and \u003ca href=\"https:\/\/proto-pasta.com\/pages\/bulk-discounts\" title=\"bulk discounts\" rel=\"noopener\" target=\"_blank\"\u003ebulk discounts\u003c\/a\u003e of 15-35% off starting at $249.\u003c\/p\u003e\n\u003cp\u003eProtopasta Clear PCTG is easy to print with bed temperatures from 80+ C and nozzle temps 255+ C. Higher nozzle temps improve layer adhesion, but risk overheating when printing too slow. We print up to 275 C, but 255 C is a good compromise. Start with a Generic PETG or PCTG profile and adjust if\/as needed.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eLike other PCTGs and PETGs, material can stick to the nozzle. \u003cspan\u003eDrying may not resolve this completely. In this case, consider reducing the flow rate to less than 100% to reduce buildup. Further, you might add a \u003ca href=\"https:\/\/forum.bambulab.com\/t\/wipe-nozzle-option-during-print\/15576\/16\" title=\"nozzle wipe at layer change gcode\" rel=\"noopener\" target=\"_blank\"\u003enozzle wipe at layer change with custom gcode\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003ePCTG is more ductile than HTPLA, but less stiff. PCTG has a thermal performance in between PLA and heat treated HTPLA. Consider PCTG as a PETG alternative for improved durability, UV, and chemical resistance. \u003ca href=\"https:\/\/proto-pasta.com\/blogs\/stories\/endless-exploration-ex12-jan-2026-high-performance-pctg-composites\" title=\"PLA, PETG, and PCTG comparison\" rel=\"noopener\" target=\"_blank\"\u003eMore details in our blog\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eProtopasta Clear PCTG includes:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% new PCTG, made in the USA for the highest quality result\u003c\/li\u003e\n\u003cli\u003equality ingredients plus in-house processing for curated chemistry\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eprocessing from 255+ C @ 2 cu mm\/s volume rate, 80+ C bed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003emore flex before break than PETG, can work for living hinges\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003emore heat resistance than PLA, but less than heat treated HTPLA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":48017871307000,"sku":"PCTG170-CLR","price":4.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g Spool","offer_id":48017871339768,"sku":"PCTG1705-CLR","price":19.99,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1kg Spool","offer_id":50083201122552,"sku":"PCTG1710-CLR","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/products\/cpe2-clr_post-industrial-petg-3d-print_ce2dc7b5-b985-4a94-856e-d49f9c71f494.jpg?v=1772066274"},{"product_id":"gray-high-impact-carbon-fiber-pctg","title":"Gray High Impact Carbon Fiber PCTG","description":"\u003cp\u003e\u003cstrong\u003e~20% stronger + 115% stiffer than PCTG w\/o fibers. \u003c\/strong\u003eProtopasta High Impact Carbon Fiber is flexible than Protopasta High Strength Carbon Fiber PCTG. \u003ca href=\"https:\/\/proto-pasta.com\/blogs\/stories\/endless-exploration-ex12-jan-2026-high-performance-pctg-composites\" title=\"PLA, PETG, and PCTG comparison\" rel=\"noopener\" target=\"_blank\"\u003eSee our comparison\u003c\/a\u003e. Already a great value, made better with free US shipping for orders $49+, 10% loyalty discount for orders $99+, and \u003ca href=\"https:\/\/proto-pasta.com\/pages\/bulk-discounts\" title=\"bulk discounts\" rel=\"noopener\" target=\"_blank\"\u003ebulk discounts\u003c\/a\u003e of 15-35% off starting at $249.\u003c\/p\u003e\n\u003cp\u003eLike \u003ca rel=\"noopener noreferrer\" title=\"Carbon Fiber\" href=\"https:\/\/www.proto-pasta.com\/collections\/carbon-fiber\" target=\"_blank\"\u003eCarbon Fiber\u003c\/a\u003e PLA, Protopasta Carbon Fiber PCTG is a performance value. It requires higher printing temperatures than Carbon Fiber PLA, but is still quite easy to print with bed temperatures from 70+ C and nozzle temps 255+ C. Higher nozzle temps improve layer adhesion, but risk overheating when printing too slow. We print up to 275 C, but 255 C is a good compromise. Start with a Generic PETG or PCTG profile and adjust if\/as needed.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eLike other PCTGs and PETGs, material can stick to the nozzle. \u003cspan\u003eDrying may not resolve this completely. In this case, consider reducing the flow rate to less than 100% to reduce buildup. Further, you might add a \u003ca href=\"https:\/\/forum.bambulab.com\/t\/wipe-nozzle-option-during-print\/15576\/16\" title=\"nozzle wipe at layer change gcode\" rel=\"noopener\" target=\"_blank\"\u003enozzle wipe at layer change with custom gcode\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eBlack High Strength Carbon Fiber PCTG is stronger and more ductile than Carbon Fiber PLA and HTPLA, but less stiff. It also has a thermal performance in between PLA and heat treated HTPLA. Consider PCTG as a PETG alternative for improved durability, UV, and chemical resistance. \u003ca href=\"https:\/\/proto-pasta.com\/blogs\/stories\/endless-exploration-ex12-jan-2026-high-performance-pctg-composites\" title=\"PLA, PETG, and PCTG comparison\" rel=\"noopener\" target=\"_blank\"\u003eMore details in our blog\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eProtopasta Carbon Fiber PCTG includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% new PCTG, made in the USA for the highest quality result\u003c\/li\u003e\n\u003cli\u003equality ingredients plus in-house processing for curated chemistry\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eprocessing from 255+ C @ 2 cu mm\/s volume rate, 80+ C bed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003emore flex before break than PETG, can work for living hinges\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003emore heat resistance than PLA, but less than heat treated HTPLA\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":48019621904632,"sku":"PGCF170-HIG","price":5.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g Spool","offer_id":48019621937400,"sku":"PGCF1705-HIG","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1kg Spool","offer_id":50083197681912,"sku":"PGCF1710-HIG","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/files\/htmf-gry_gray-matte-fiber-htpla-3d-print.jpg?v=1772064726"},{"product_id":"white-glass-fiber-pctg","title":"White Glass Fiber PCTG","description":"\u003cp\u003e\u003cstrong\u003eStiff like PLA, durable like PCTG. ~75% stiffer than PCTG w\/o fibers. Premium layer-hiding texture + low gloss.\u003c\/strong\u003e \u003ca rel=\"noopener\" title=\"custom colors\" href=\"https:\/\/proto-pasta.com\/pages\/custom-orders\" target=\"_blank\"\u003eContact us\u003c\/a\u003e for custom colors!\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eAlready a great value, made better with free US shipping for orders $49+, 10% loyalty discount for orders $99+, and \u003ca rel=\"noopener\" title=\"bulk discounts\" href=\"https:\/\/proto-pasta.com\/pages\/bulk-discounts\" target=\"_blank\"\u003ebulk discounts\u003c\/a\u003e of 15-35% off starting at $249.\u003c\/p\u003e\n\u003cp\u003eLike \u003ca href=\"https:\/\/www.proto-pasta.com\/collections\/carbon-fiber\" title=\"Carbon Fiber\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eCarbon Fiber\u003c\/a\u003e PLA, Protopasta Carbon Fiber PCTG is a performance value. It requires higher printing temperatures than Carbon Fiber PLA, but is still quite easy to print with bed temperatures from 70+ C and nozzle temps 255+ C. Higher nozzle temps improve layer adhesion, but risk overheating when printing too slow. We print up to 275 C, but 255 C is a good compromise. Start with a Generic PETG or PCTG profile and adjust if\/as needed.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eLike other PCTGs and PETGs, material can stick to the nozzle. \u003cspan\u003eDrying may not resolve this completely. In this case, consider reducing the flow rate to less than 100% to reduce buildup. Further, you might add a \u003ca rel=\"noopener\" title=\"nozzle wipe at layer change gcode\" href=\"https:\/\/forum.bambulab.com\/t\/wipe-nozzle-option-during-print\/15576\/16\" target=\"_blank\"\u003enozzle wipe at layer change with custom gcode\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eBlack High Strength Carbon Fiber PCTG is stronger and more ductile than Carbon Fiber PLA and HTPLA, but less stiff. It also has a thermal performance in between PLA and heat treated HTPLA. Consider PCTG as a PETG alternative for improved durability, UV, and chemical resistance. \u003ca rel=\"noopener\" title=\"PLA, PETG, and PCTG comparison\" href=\"https:\/\/proto-pasta.com\/blogs\/stories\/endless-exploration-ex12-jan-2026-high-performance-pctg-composites\" target=\"_blank\"\u003eMore details in our blog\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eProtopasta Carbon Fiber PCTG includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% new PCTG, made in the USA for the highest quality result\u003c\/li\u003e\n\u003cli\u003equality ingredients plus in-house processing for curated chemistry\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eprocessing from 255+ C @ 2 cu mm\/s volume rate, 80+ C bed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003emore flex before break than PETG, can work for living hinges\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003emore heat resistance than PLA, but less than heat treated HTPLA\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":48019623313656,"sku":"PGGF170-WHT","price":5.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g Spool","offer_id":48019623346424,"sku":"PGGF1705-WHT","price":29.99,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1kg Spool","offer_id":50083200237816,"sku":"PGGF1710-WHT","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/files\/HTGF-WHT-icosa-3dprint.png?v=1772066259"},{"product_id":"recycled-black-flexible-tpu","title":"Recycled Black Flexible TPU","description":"\u003cdiv class=\"sqs-block html-block sqs-block-html\"\u003e\n\u003ch1\u003eLike new 98A TPU!\u003c\/h1\u003e\n\u003cp\u003eRecycled version of our \u003ca href=\"https:\/\/proto-pasta.com\/products\/clear-flexible-tpu?_pos=1\u0026amp;_sid=076b438f1\u0026amp;_ss=r\" title=\"Clear Flexible TPU\" rel=\"noopener\" target=\"_blank\"\u003eClear Flexible 98A TPU\u003c\/a\u003e made from reprocessed short spools of new material. Performs more\/less like new for half the price!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFeatured in EX3, \u003ca rel=\"noopener\" href=\"https:\/\/proto-pasta.com\/blogs\/stories\/endless-exploration-ex3-july-2024-tpe-tpu-materials\" title=\"Endless Exploration July 2024\" target=\"_blank\"\u003eJuly 2024's Endless Exploration\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eA black, flexible TPU with hardness of about 98A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDurable w\/ good memory when folded like a hinge (folding triangle from \u003ca rel=\"noopener\" href=\"https:\/\/www.makershed.com\/collections\/make-author-spotlights-joan-horvath-and-rich-cameron\" target=\"_blank\"\u003e\u003cspan\u003eJoan Horvath and Rich Cameron's book \u003c\/span\u003e\u003c\/a\u003e\u003ci\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.makershed.com\/collections\/make-author-spotlights-joan-horvath-and-rich-cameron\" target=\"_blank\"\u003eMake: Geometry\u003c\/a\u003e)\u003c\/i\u003e\n\u003c\/li\u003e\n\u003cli\u003eAbsorbs energy for minimal return when bounced\u003c\/li\u003e\n\u003cli\u003eEasy printing and holds shape up to 200 C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDrying overnight recommended before printing\u003c\/li\u003e\n\u003cli\u003ePrinting starting at 240 C w\/ no bed heat required\u003c\/li\u003e\n\u003cli\u003ePrep bed w\/ Magigoo to avoid permanent bond\u003c\/li\u003e\n\u003cli\u003eCompare to 90A-95A hardness or NinjaTek Cheetah\u003c\/li\u003e\n\u003cli\u003eProduced by Protoplant exclusively for Protopasta\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003ca rel=\"noopener\" title=\"Endless Exploration Filament Subscription\" href=\"https:\/\/www.proto-pasta.com\/products\/endless-pastabilities\" target=\"_blank\"\u003eSubscribe to Endless Exploration\u003c\/a\u003e for new materials with new function first and at a discount, every 2 months. \u003ca title=\"Newsletter subscribe\" href=\"http:\/\/3dp.li\/newsletter\" target=\"_blank\"\u003eSubscribe to our newsletter\u003c\/a\u003e for product news, support \u0026amp; discounts!\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Protoplant, makers of Protopasta","offers":[{"title":"1.75mm \/ 50g Coil","offer_id":50082663923960,"sku":"R98A170-BLK","price":4.5,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1kg Spool","offer_id":50082663989496,"sku":"R98A1710-BLK","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9095\/files\/FlexibleTPE-ezgif.com-video-to-gif-converter.gif?v=1723768690"}],"url":"https:\/\/proto-pasta.com\/collections\/non-pla-polymers.oembed","provider":"Protoplant, makers of Protopasta","version":"1.0","type":"link"}