Gold Dust Translucent HTPLA with Gold Glitter

Metallic Gold PLA Filament

$5.00 USD

HTGL170-GDT

With big fleck for maximum texture, Gold Dust Glitter Flake HTPLA  has a translucent base with no color added, just big gold flecks. Print thin and let other colors show through or print thick layers and watch layer lines disappear!

Technical Data Sheets

Technical data sheets available for download here

Safety Data Sheets

Safety data sheets available for download here.

Shipping

We provide a number of domestic shipping options within the United States via UPS, including free shipping on orders of $50 or more. We also provide international shipping via DHL Express.

Returns

At ProtoPlant's discretion, returns and replacements will be accepted within 90 days of purchase.  Please check the material label before opening your product.  Only sealed product can be returned. Shipping of items for exchange or refund is paid by the customer. More information about returns and replacements can be found in our terms and conditions



Do you love the glitter pop of Stardust? Meet Gold Dust!

Print with the ease of standard PLA with standard hardware and temperatures, but make fun, mesmerizing prints that stand out.  Celebrate good times by printing toys, treasures, and keepsakes.  If you want to make a print more fun, just add some metallic pop!  Our metallic finish contains no actual metal and has little risk of clogging or wearing your nozzle, and it won't make a glitter mess, but beware the printing is sure to be addictive!  Metallic particles are relatively small but have some orientation effects, giving top/bottom surfaces more shine than sidewall, so have some fun playing with orientation to see how the result changes!  We recommend 0.2 mm layers for the best result.

Like our other HTPLAs, Metallic HTPLA can be "Heat Treated"  to increase crystallinity for "Higher Temperature" resistance compared to amorphous PLA, ABS, and co-polyesters like PETG!  Glittler Flake HTPLA prints translucence, but turns opaque when heat treated (or crystallized).  With a more crystalline structure, heat treated HTPLA parts can hold form to near melting, though temperatures where the material is practically useful vary greatly depending on geometry and load conditions!

For this improved the performance, your prints should be baked in an oven until you see a change from translucent to opaque with reduced gloss.  This visual change indicating the improved performance! We've  seen the change take place in 5-10 minutes on thin walled parts but can take an hour or more.  We've had good luck in a quality, at home convection oven at 110C (225F).  Parts will get very "floppy" before becoming more firm, so please leave supports on your parts or support them and bake them on a flat, non-radiating surface (like glass, ceramic, or composite).


  • Available in 1.75 & 2.85 (3) mm diameter on a 500g diameter recyclable cardboard spool
  • Usable on most PLA-compatible printers, such as Lulzbot, Makerbot, FlashForge, Dremel, Ultimaker, Printrbot, and more!

No abrasive fillers so expect normal wear with standard nozzles.

In our experience, good results were achieved using standard PLA parameters ranging from 195-225C nozzle with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required but up to 60C is okay.  Beware, if the bed temperature is too high, your part base could actually heat treat while printing, increasing warping and decreasing adhesion.  Some shrinkage will occur in the heat treating process, so dimension critical parts may need to be scaled appropriately (as much as 2.5% in our experience).


Customer Reviews
4.9 Based on 16 Reviews
5 ★
94% 
15
4 ★
0% 
0
3 ★
6% 
1
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
E
03/21/2023
Eric
I recommend this product

Pretty Nifty

It looks like youre printing gold glitter....i make foam dart blasters and made and iron man themed with this gold and the BOME Red.....even though a little more expensive than most filaments out there, definately get what you pay for. .2 layer height and cant really see any lining

05/10/2023

Protopasta, Filament by Protoplant

Thanks for appreciating the pasta!

MD
11/05/2022
Michael D.
United States United States
I recommend this product

Great!

Protopasta is overall some of the best PLA on the market. Great print quality, beautiful colors and extremely easy to print with.

11/11/2022

Protopasta, Filament by Protoplant

Thank you for the kind words. We try our best :-) We appreciate you appreciating the pasta! Take care, Alex

NC
01/13/2022
Nicholas C.
United States United States

Beautiful color

This and the last couple spools i’ve gotten have been very very well spooled on. No tangles or knots. I was so happy. Thank you

NM
12/28/2021
Nathaniel M.
United States United States

Absolutely Beautiful

It print’s extremely well and is the best looking gold filament I’ve ever used.

Protopasta, Filament by Protoplant Gold Dust Translucent HTPLA with Gold Glitter Review
A Protopasta, Filament by Protoplant Customer
DP
12/23/2021
David P.
United States United States

Best gold ever

I’ve tried other gold filaments, and other glitters, and this one is the best. Hands down. Get some now!

Free Domestic Shipping

Free shipping in the lower 48 + DC over $49.

International Shipping

Live outside the U.S.? We ship all over the world!

Support from the Source

Expert, in-house support from Protopasta makers.