Stardust Silver Glitter HTPLA

Translucent Silver PLA Filament

$5.00 USD

HTGL170-DST
Sometimes you want a professional matte finish and sometimes you just want some shine! Take gloss to another level with Glitter-filled HTPLA . Print with the ease of standard PLA with standard hardware and temperatures, but make fun, mesmerizing prints that stand out. Celebrate good times with ornaments, disco balls, toys, and treasures. If you want to make a print more fun, just add glitter. Glitter-filled filament has little risk of clogging or wearing your nozzle, and it won't make a glitter mess, but beware, printing with glitter is sure to be addictive! Glitter particles will lay flat with smaller layers, giving top/bottom surfaces more shine than sidewall, so have some fun playing with resolution to see how the result changes!

Technical Data Sheets

Technical data sheets available for download here

Safety Data Sheets

Safety data sheets available for download here.

Shipping

We provide a number of domestic shipping options within the United States via UPS, including free shipping on orders of $50 or more. We also provide international shipping via DHL Express.

Returns

At ProtoPlant's discretion, returns and replacements will be accepted within 90 days of purchase.  Please check the material label before opening your product.  Only sealed product can be returned. Shipping of items for exchange or refund is paid by the customer. More information about returns and replacements can be found in our terms and conditions



Give your prints a festive POP with sparkly Glitter Flake!

Like our other HTPLAs, Glitter Flake HTPLA can be "Heat Treated"  to increase crystallinity for "Higher Temperature" resistance compared to amorphous PLA, ABS, and co-polyesters like PETG!  Glittler Flake HTPLA prints translucence, but turns opaque when heat treated (or crystallized).  With a more crystalline structure, HTPLA's Heat Deflection Temperature (HDT) can be practically elevated to 120C (250F) or more depending on post-processing. Heat treated parts retain more stiffness to higher temperatures!

For this improved performance, your prints should be baked in an oven until you see a change from translucent to opaque with reduced gloss.  This visual change indicating the improved performance! We've  seen the change take place in 5-10 minutes on thin walled parts but can take an hour or more.  We've had good luck in a quality, at home convection oven at 110C (225F).  Parts will get very "floppy" before becoming more firm, so please leave supports on your parts or support them and bake them on a flat, non-radiating surface (like glass, ceramic, or composite).
  • Available in 1.75 & 2.85 (3) mm diameter on a 500g diameter recyclable cardboard spool
  • Usable on most PLA-compatible printers, such as Lulzbot, Makerbot, FlashForge, Dremel, Ultimaker, Printrbot, and more!

No abrasive fillers so expect normal wear with standard nozzles.

In our experience, good results were achieved using standard PLA parameters ranging from 190-230C nozzle with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required but up to 70C okay.  Some shrinkage will occur in the heat treating process, so dimension critical parts may need to be scaled appropriately (as much as 2.5% in our experience).


Customer Reviews
4.8 Based on 47 Reviews
5 ★
91% 
43
4 ★
4% 
2
3 ★
2% 
1
2 ★
0% 
0
1 ★
2% 
1
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
JN
10/08/2021
Joe N.
United States United States
I recommend this product

Favorite Filament

I love protopasta filament!!! Just wish it was for a full 1kg spool not half spools. At the moment i have 9 spools and love every color they make!

Protopasta, Filament by Protoplant Stardust Translucent HTPLA with Silver Glitter Review
A Protopasta, Filament by Protoplant Customer
PL
06/12/2021
Peter L.
United States United States

Time to decorate

I got a sample of this for no particular reason other than I wanted to see how it looked and printed. I realized that I could use it to make ceiling snowflake decorations to replace the paper cutout ones that I've been making for years which just can't get very intricate. The first test looks wonderful. It's strong and holding together well despite being only 0.8mm thick with some of the lines only a few passes wide. I'm using a parametric random snowflake generation file from Thingiverse for use in OpenSCAD to create lots of unique patterns. Time to order a full roll!!

Protopasta, Filament by Protoplant Stardust Translucent HTPLA with Silver Glitter Review
BN
02/04/2021
Brittany n.
United States United States

Best glitter filament

We have a small 3d printing business and the only glitter filament we use is protopasta. This silver is beautiful as is all of their options!

AC
03/10/2020
Alexis C.
United States United States

Just love this filament

I can't get enough of this filament.

AC
03/06/2020
Alexis C.
United States United States

One of my favorites

I really like the Stardust it makes great Christmas cards.

Free Domestic Shipping

Free shipping in the lower 48 + DC over $49.

International Shipping

Live outside the U.S.? We ship all over the world!

Support from the Source

Expert, in-house support from Protopasta makers.