For the Lulz Metallic Green HTPLA

Metallic Green PLA Filament

$5.00 USD

HTPM170-FTL

Another shout out to Thomas Sanladerer (toms3d.org) for the challenge to make an ugly color during his visit.  We ended up with some greens that weren't terrible and found it's very difficult to make an ugly color.  To be honest, Lulzbot's company green is not my favorite color, but it was a fun challenge to recreate this color.  I was inspired by the recent Mini 2 release shortly after ERRF.  Realizing I'd missed seeing Lulzbot at ERRF, I followed my inspiration to make For the Lulz Metallic Green HTPLA .  Who knew adding sparkles would totally change my impression of this color?  In the light it shifts from lemon to lime covering all the versions I've seen of this color.  I find it shockingly beautiful and I hope you do to!  Enjoy!!!

More product details

Technical Data Sheets

Technical data sheets available for download here

Safety Data Sheets

Safety data sheets available for download here.

Shipping

We provide a number of domestic shipping options within the United States via UPS, including free shipping on orders of $50 or more. We also provide international shipping via DHL Express.

Returns

At ProtoPlant's discretion, returns and replacements will be accepted within 90 days of purchase.  Please check the material label before opening your product.  Only sealed product can be returned. Shipping of items for exchange or refund is paid by the customer. More information about returns and replacements can be found in our terms and conditions



Why did we make this unique green color? We did it for the lulz...

Created from our highest quality, translucent HTPLA v2, this stuff is green and sparkly!

Print with the ease of standard PLA with standard hardware and temperatures, but make fun, mesmerizing prints that stand out. Celebrate good times by printing toys, treasures, and keepsakes. If you want to make a print more fun, just add some metallic pop! Our metallic finish contains no actual metal and has little risk of clogging or wearing your nozzle, and it won't make a glittery mess, but beware the printing is sure to be addictive! Metallic particles are relatively small but have some orientation effects, giving top/bottom surfaces more shine than sidewall, so have some fun playing with orientation to see how the result changes! We recommend 0.2 mm layers for the best result.

Heat Treating

Like our other HTPLAs, Metallic HTPLA can be "Heat Treated" to increase crystallinity for "Higher Temperature" resistance compared to amorphous PLA, ABS, and co-polyesters like PETG! Glittler Flake HTPLA prints translucence, but turns opaque when heat treated (or crystallized). With a more crystalline structure, heat treated HTPLA parts can hold form to near melting, though temperatures where the material is practically useful vary greatly depending on geometry and load conditions! For this improved the performance, your prints should be baked in an oven until you see a change from translucent to opaque with reduced gloss. This visual change indicating the improved performance! We've seen the change take place in 5-10 minutes on thin walled parts but can take an hour or more. We've had good luck in a quality, at home convection oven at 110C (225F). Parts will get very "floppy" before becoming more firm, so please leave supports on your parts or support them and bake them on a flat, non-radiating surface (like glass, ceramic, or composite).

For this improved performance, your prints should be baked in an oven until you see a change from translucent pink to opaque pink with reduced gloss. This visual change indicates the improved performance! We've seen the change take place in 5-10 minutes on thin walled parts but can take an hour or more. We've had good luck in a quality, at home convection oven at 110C (225F). Parts will get very "floppy" before becoming more firm, so please leave supports on your parts or support them and bake them on a flat, non-radiating surface (like glass, ceramic, or composite).

Printing

In our experience, good results were achieved using standard PLA parameters ranging from 195-225C nozzle with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required but up to 60C is okay. Beware, if the bed temperature is too high, your part base could actually heat treat while printing, increasing warping and decreasing adhesion. Some shrinkage will occur in the heat treating process, so dimension critical parts may need to be scaled appropriately (as much as 2.5% in our experience).

  • No abrasive fillers so expect normal wear with standard nozzles.
  • Available in 1.75 & 2.85 (3) mm diameter on a 500g diameter recyclable cardboard spool
  • Usable on most PLA-compatible printers, such as Lulzbot, Makerbot, FlashForge, Dremel, Ultimaker, Printrbot, and more!


Customer Reviews
4.9 Based on 11 Reviews
5 ★
91% 
10
4 ★
9% 
1
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
KM
10/27/2021
Ky M.
United States United States
I recommend this product

Prints amazing

I've had a few spools of ProtoPasta given as gifts, and this is my first purchase. It's really good; Always has been, and I don't imagine that changing. Colors are amazing and prints are super predictable on my Prusa i3 MK3S/MMU2S

CM
09/05/2021
Colton M.
United States United States
I recommend this product

I am 100% happy with this purchase

The spool delivered fast, the color on the spool is a nice pleasing color, the prints aren’t too bright and overbearing, it prints so well and smooth, it’s all around a great pick up and an awesome color!

Protopasta, Filament by Protoplant For the Lulz Metallic Green HTPLA Review
HB
07/11/2021
Harley B.
United States United States

I quite like this

You know I find this to be a very interesting color. Through some angles it almost looks yellow but in lower light it’s a very neat slime green. Print it thin and it’s very yellow but thicker adds some more green to it. I just find it very interesting and I do quite like it.

A Protopasta, Filament by Protoplant Customer
FP
02/05/2021
Fox P.
United States United States

In it for the lulz...

The first 3d printeri truely loved was the lulzbot Taz at the San Jose. Hackerspace. I'd reserve it for hours starting at midnight just to spend my evening with its stable build platform and dynamic heat range, knowjng even when I had that great valley income I could never afford one.now, I've gotten older and poorer and lulzbot has anew name but the price and the model still lookthe same, myender 5 is a workhorse but this green really takes me back to those first days where ugky machines made beautiful things

AC
03/06/2020
Alexis C.
United States United States

Interesting shade of green

Starts out yellow when i first comes out of the extruder but then turns green. Interesting neon green

Free Domestic Shipping

Free shipping in the lower 48 + DC over $49.

International Shipping

Live outside the U.S.? We ship all over the world!

Support from the Source

Expert, in-house support from Protopasta makers.