Cupid's Crush Metallic Pink HTPLA

Metallic Pink PLA Filament

$5.00 USD

HTPM170-PNK

Remember your first crush?  Remember how he or she could do no wrong and everything about them sparkled?  Look out because you're about to be struck by our most sparkly metallic filament yet!  Perfect for gifts and sharing, spread the love with Cupid's Crush Metallic Pink HTPLA this Valentine's and all year long! This pink metallic PLA filament contains no actual metal and has little risk of clogging or wearing your nozzle, and it won't make a glittery mess, but beware the printing is sure to be addictive!

More product details

Technical Data Sheets

Technical data sheets available for download here

Safety Data Sheets

Safety data sheets available for download here.

Shipping

We provide a number of domestic shipping options within the United States via UPS, including free shipping on orders of $50 or more. We also provide international shipping via DHL Express.

Returns

At ProtoPlant's discretion, returns and replacements will be accepted within 90 days of purchase.  Please check the material label before opening your product.  Only sealed product can be returned. Shipping of items for exchange or refund is paid by the customer. More information about returns and replacements can be found in our terms and conditions



The most sparkly pink metallic PLA you've ever seen! Happy Valentine's!!!

Cupid’s Crush HTPLA has a beautiful pink metallic finish without any abrasive or metallic fillers!

Print with the ease of standard PLA filaments using standard 3D printing hardware and temperatures, but make fun, mesmerizing pink prints that stand out with a convincing metallic finish. Celebrate good times by printing pink metallic PLA toys, treasures, and keepsakes. If you want to make a print more fun, just add some metallic pop! The pink metallic finish comes from glitter flakes that are relatively small but have some orientation effects, giving top/bottom surfaces more shine than sidewall, so have some fun playing with orientation to see how the result changes!

Heat Treating

Like our other HTPLAs, Cupid's Crush Metallic Pink HTPLA can be "Heat Treated" to increase crystallinity for "Higher Temperature" resistance compared to amorphous PLA, ABS, and co-polyesters like PETG! Glitter Flake HTPLA prints translucent, but turns opaque when heat treated (or crystallized). With a more crystalline structure, heat treated Metallic Pink HTPLA parts can hold form to near melting, though temperatures where the material is practically useful vary greatly depending on geometry and load conditions!

For this improved performance, your prints should be baked in an oven until you see a change from translucent pink to opaque pink with reduced gloss. This visual change indicates the improved performance! We've seen the change take place in 5-10 minutes on thin walled parts but can take an hour or more. We've had good luck in a quality, at home convection oven at 110C (225F). Parts will get very "floppy" before becoming more firm, so please leave supports on your parts or support them and bake them on a flat, non-radiating surface (like glass, ceramic, or composite).

Printing

In our experience, good results were achieved using standard PLA parameters ranging from 195-225C nozzle with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required but up to 60C is okay. Beware, if the bed temperature is too high, your part base could actually heat treat while printing, increasing warping and decreasing adhesion. Some shrinkage will occur in the heat treating process, so dimension critical parts may need to be scaled appropriately (as much as 2.5% in our experience).

  • No abrasive fillers so expect normal wear with standard nozzles.
  • Available in 1.75 & 2.85 (3) mm diameter on a 500g diameter recyclable cardboard spool
  • Usable on most PLA-compatible printers, such as Lulzbot, Makerbot, FlashForge, Dremel, Ultimaker, Printrbot, and more!


Customer Reviews
4.8 Based on 30 Reviews
5 ★
90% 
27
4 ★
3% 
1
3 ★
7% 
2
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
AN
10/12/2023
Aaron N.
United States United States

Love these colors

Prints beautifully. Used this to make a "Happiness Patrol" TARDIS.

Protopasta, Filament by Protoplant Cupid's Crush Metallic Pink HTPLA Review
12/22/2023

Protopasta, Filament by Protoplant

Oh yeah. Right on!

CV
03/31/2023
Colleen V.
United States United States
I recommend this product

Cupid’s crush

Very pretty glittery pink. My customers love the color!

05/12/2023

Protopasta, Filament by Protoplant

So glad to hear! Take care and enjoy!!!

J
12/29/2021
Jean
United States United States
I recommend this product

Love this sparkl.y pink

This pink is a little towards the salmon color, but it is beautiful. I sell these pickleball paddle bag tags on Etsy redheadmaker.com. This is a very good seller.

Protopasta, Filament by Protoplant Cupid's Crush Metallic Pink HTPLA Review
SR
12/13/2021
Scott R.
United States United States

Tickled Pink

Very happy with how well this filament prints and looks! It pairs amazingly well with a ton of colors. If you are looking for a fun pink definitely pick this one up!

TL
08/11/2021
Tony L.
United States United States

Great Company

Great company, great products.

Free Domestic Shipping

Free shipping in the lower 48 + DC over $49.

International Shipping

Live outside the U.S.? We ship all over the world!

Support from the Source

Expert, in-house support from Protopasta makers.